MCFELIX
-
Posts
187 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by MCFELIX
-
you can use you old hard drive and transfer to the new one,clone you drive good luck
-
question ,mastercam give you wait codes or you need edit it =)
-
toolman and jarret .with this parameter i dont get anything no even 1 pcs at the instant touch the part , it break
-
gary my rpm 450 and my feed is .001
-
hello people i have a battle with carbide drill .I need drill .200 dia drill carbide in a 17-4 ph material but my feed and speed did not work right. I used peck drilling and one shot cut also I changed to three flute drill and got 20 parts more. please any feedback
-
solo pregunta esta comunidad ,hay mucha gente de varios paises y mucha gente que habla espanol just asking a quiestion somebody helping you in the forum few peolpe speak spanish.
-
mick you can use a macro program store in the 9000 program and you can set in the parameter to call 9000s program with g codes the have diferents macros for it
-
jOHN in the post said is support : MPAN5300 # Product : MILL # Machine Name : Anilam # Control Name : Anilam 1400 - 5300 # Description : GENERIC ANILAM 1400/5300 SERIES MILL POST # 4-axis/Axis subs. : YES (Not Configured) # 5-axis : NO # Subprograms : YES # Executable : MP 9.13 #
-
John the post is Anilam
-
Hello members of this forum i need little help with my post for anilam 3000M i have a file the need holes and i try to get subprogram but the mastercam or the post can`t generate it need change something or anybody know what need to change to get sub program
-
Thanyou joshua i will try later, i will letyou know
-
ok thankyou for the tips zero
-
nobody have it this information
-
thankyou zero the control is anilam3000 my email is [email protected]
-
hello members i have question about how i can fix the g19 plane for a post of anilan machine my post is not posting g19 plane any help please thankyou Felix Ortega
-
contour surface
-
contour surface
-
contour surface
-
rough and finish
-
Two question I need to cutting a part in the horizontal machine but I need to cut in the vertical way (y+ to y-) I can find the right choice in the menu also I need clear my clamp and I can find the option too please any advise or help I want back my version 9
-
eric you can use cutter compesation in polar interpolation G112 i dont know about G117
-
welcome to the forum andy ? sorry no experience in siemens
-
wfl? more information please?
-
thanks for all the inputs ,yes maybe is only one way to go, i will post the part tomorrow in the ftp for more information if somebody recomend tools for this part
-
waooo sound like alot time for cycle time