you can use you old hard drive and transfer to the new one,clone you drive good luck

question ,mastercam give you wait codes or you need edit it =)

toolman and jarret .with this parameter i dont get anything no even 1 pcs at the instant touch the part , it break

gary my rpm 450 and my feed is .001

hello people i have a battle with carbide drill .I need drill .200 dia drill carbide in a 17-4 ph material but my feed and speed did not work right. I used peck drilling and one shot cut also I changed to three flute drill and got 20 parts more. please any feedback

solo pregunta esta comunidad ,hay mucha gente de varios paises y mucha gente que habla espanol just asking a quiestion somebody helping you in the forum few peolpe speak spanish.

mick you can use a macro program store in the 9000 program and you can set in the parameter to call 9000s program with g codes the have diferents macros for it

jOHN in the post said is support : MPAN5300 # Product : MILL # Machine Name : Anilam # Control Name : Anilam 1400 - 5300 # Description : GENERIC ANILAM 1400/5300 SERIES MILL POST # 4-axis/Axis subs. : YES (Not Configured) # 5-axis : NO # Subprograms : YES # Executable : MP 9.13 #

John the post is Anilam

Hello members of this forum i need little help with my post for anilam 3000M i have a file the need holes and i try to get subprogram but the mastercam or the post can`t generate it need change something or anybody know what need to change to get sub program

Thanyou joshua i will try later, i will letyou know

ok thankyou for the tips zero

nobody have it this information

thankyou zero the control is anilam3000 my email is [email protected]

hello members i have question about how i can fix the g19 plane for a post of anilan machine my post is not posting g19 plane any help please thankyou Felix Ortega