modeling spindle

[cappy]

Hello,

 

Can someone tell me how to model a spindle for tool colision purposes. I am using X2 and have seen the V-flange holder and tool, but there are times when I am machining over the pallet table. i would like to check from a side view that the spindle cartridge does not hit the table.

 

Thanks in advance,

Greg.

[crazy^millman]

Draw the whole thing as custom tool, spindle, holder, and tool. If using HST toolpaths you can make a special holder and keep the tool separate. I understand soon you might be able to use custom holders for all toolpaths but until then I would do a custom tool so it will work with all toolpaths in Mastercam.

 

HTH