hELP TO GET RESULT IN POST

[MCFELIX]

Hello members of this forum i need little help with my post for anilam 3000M

i have a file the need holes and i try to get subprogram but the mastercam or the post can`t generate it need change something or anybody know what need to change to get sub program

[Guest]

What post are you trying to use?

 

Not all posts support sub-programs.

[MCFELIX]

John the post is

Anilam

[Guest]

You need to look inside at the very top of the post

 

code:

---

# Post Name           : MPAN113X

# Product : MILL

# Machine Name : ANILAM

# Control Name : SERIES 1100M

# Description : ANILAM SERIES 1000M

# 4-axis/Axis subs. : NO

# 5-axis : NO

# Subprograms : NO

# Executable : MP 9.13

---

To see if it even supports subs

[MCFELIX]

jOHN in the post said is support

: MPAN5300

# Product : MILL

# Machine Name : Anilam

# Control Name : Anilam 1400 - 5300

# Description : GENERIC ANILAM 1400/5300 SERIES MILL POST

# 4-axis/Axis subs. : YES (Not Configured)

# 5-axis : NO

# Subprograms : YES

# Executable : MP 9.13

#