Post help

[rgollar]

First thing is im using version 9. I am editing or should I say trying to edit the mpfadal2 post. What I am trying to do is take the speed code and the spindle code out every time I use the tapping cycle. I finally got it to post a G84.1 instead of a G84. The problem is im using a format 1 but my the mpfada2 post is set up for a format 2. I want line N100 not to post the seed and spindle direction. Thanks for the help in advance.

 

N10O0001(EXAMPLE POST)

(DATE=DD-MM-YY - 17-08-07 TIME=HH:MM - 07:51)

N20G20

N30G0G17G40G49G80G90H0E0Z0

N40( 1/4-20 TAPRH TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .25)

N50(DRILL)

N60T1M6

N70M61

N80A-0.

N90M60

N100G0G90S1069M3E1X0.Y0.

N110H1Z2.M8

N120G84.1G98Z-1.R0.1QF

N130G80

N140M5M9

N150G91H0Z0.

N160E0X0Y0

N170M30

[rgollar]

I just wanted to say I am not asking for a post Just what area of the post to edit to take care of this. Thanks

[Guest]

Mail

[Bryan Johnson]

You can use the "nextdc" variable to check for tap.

See example below. Note that for V9, you do not use the $

 

p_spdlon # Check for rigid tapping or probe

if nextdc$ <> 3, *spindle

[rgollar]

Thank you both for the help. very much appreciated.