problems when i save a file....

[Dennis (Belgium)]

Hello,

 

When i open a MC file my mastercam is in points (every number is in ordinary numbers for exa: 10.563) when I save this file and open it the next time all the points seems to be in comma's!!

 

Now when i try to change a value in for example my retract or feed speed he dont let me use point and gives me a yellow frame.. can someone tell me what value to change to use only points or change some configuration file, now its impossible to change something in my toolpath values and so i cand make desent program's

 

best regards Dennis

[Ken Erman from CNC Software Inc.]

I don't think this is a Mastercam setting causing this. My guess is it's an International language setting. I don't have a clue about where to go to check this or to change it. Maybe someone else does.

 

PMGuy

[Bullines]

This is the third question about commas from someone from Belgium in the past two days:

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=002710

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=002709

 

Maybe follow PMGuy's advice and look at your computer's own settings (Regional Options applet in the Windows Control Panel).

 

PS: Spamming is not a good way to get the forum's attention. Bumping a thread is acceptable, but nobody likes spam.

[Dennis (Belgium)]

If I have a problem with the comma's and points I asked the forum... and nobody nows the wright answer?? I think that's not spamming!

[Wallace]

Hi PMGuy, Bullines, Dennis and All,

 

International language setting not change the settings for Mastercam.

In Mastercam all datas using point... and not change for comma.

[Wallace]

Dennis,

 

Wrong...wrong... wrong...

Check your question for comma in Best allocation values toppic.

[Bullines]

Wallace, they tried my suggestion from this thread:

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=002705

 

And it didn't help. I'm out of ideas.