Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

block drilling problem

BrintC

By BrintC,
in Industrial Forum

 Share

Recommended Posts

BrintC Newbie

BrintC

Posted
Posted

My name is Brint and I'm with Carlsens Custom Cabinets in Mobile Al.I'm relatively new to Mastercam, 3 years with a router.Our company recently purchased X2 and I've upgraded my post processor and old files from version 9 with only one problem;the block drill doesnt seem to read properlly.here is a program that runs fine in version 9 but the same program in version X2 stops at the time to drill.old working program;

%

O0001 ( 42GEND )

( DATE=DD-MM-YY - 27-02-07 )

G00 G17 G20 G40 G80 G90

M92 M88B0 M89B0

G54

G91 G28 Z0 M95

G08 P1

 

N1

( COMBINED DRILL BANKS )

( 75 LINE BORE )

M88 B16

M89 B30

M21

G00 G17 G90 G55 X45.39 Y77.562

/ M23

Z1.5

G98 G81 Z.4375 R1.25 F100.

Y71.2628

Y64.9636

Y58.6644

Y41.125

Y34.8258

Y28.5266

Y22.2274

X37.265

Y28.5266

Y34.8258

Y41.125

Y58.6644

Y64.9636

Y71.2628

Y77.562

X33.51

Y71.2628

Y64.9636

Y58.6644

Y41.125

Y34.8258

Y28.5266

Y22.2274

X25.385

Y28.5266

Y34.8258

Y41.125

Y58.6644

Y64.9636

Y71.2628

Y77.562

X21.63

Y71.2628

Y64.9636

Y58.6644

Y41.125

Y34.8258

Y28.5266

Y22.2274

X13.505

Y28.5266

Y34.8258

Y41.125

Y58.6644

Y64.9636

Y71.2628

Y77.562

X9.75

Y71.2628

Y64.9636

Y58.6644

Y41.125

Y34.8258

Y28.5266

Y22.2274

X1.625

Y28.5266

Y34.8258

Y41.125

Y58.6644

Y64.9636

Y71.2628

Y77.562

Z1.5

G80

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N2

( 1/2 DOWN SHEAR )

( TOOL - 14 DIA. OFF. - 4 LEN. - 14 DIA. - .5 )

( 75-375 DADO )

T14

G00 G17 G90 G54 X7.8125 Y89.25

/ M13 S18000

G43 H14 Z1.5

Z1.375

G01 G42 D4 X5.8125 Z.375 F999.

X.125

Y89.375

X11.5

Y89.25

X5.8125

X5.3125

G40 X3.3125 Z1.375

Z1. F200.

G00 Z1.5

X19.6925

Z1.375

G01 G42 D4 X17.6925 Z.375 F999.

X12.005

Y89.375

X23.38

Y89.25

X17.6925

X17.1925

G40 X15.1925 Z1.375

Z1. F200.

G00 Z1.5

X31.5725

Z1.375

G01 G42 D4 X29.5725 Z.375 F999.

X23.885

Y89.375

X35.26

Y89.25

X29.5725

X29.0725

G40 X27.0725 Z1.375

Z1. F200.

G00 Z1.5

X43.4525

Z1.375

G01 G42 D4 X41.4525 Z.375 F999.

X35.765

Y89.375

X47.14

Y89.25

X41.4525

X40.9525

G40 X38.9525 Z1.375

Z1. F200.

G00 Z1.5

X39.4525 Y49.375

Z1.375

G01 G42 D4 X41.4525 Z.375 F999.

X47.14

Y49.25

X35.765

Y49.375

X41.4525

X41.9525

G40 X43.9525 Z1.375

Z1. F200.

G00 Z1.5

X43.4525 Y45.375

Z1.375

G01 G42 D4 X41.4525 Z.375 F999.

X35.765

Y45.5

X47.14

Y45.375

X41.4525

X40.9525

G40 X38.9525 Z1.375

Z1. F200.

G00 Z1.5

X31.5725

Z1.375

G01 G42 D4 X29.5725 Z.375 F999.

X23.885

Y45.5

X35.26

Y45.375

X29.5725

X29.0725

G40 X27.0725 Z1.375

Z1. F200.

G00 Z1.5

X27.5725 Y49.375

Z1.375

G01 G42 D4 X29.5725 Z.375 F999.

X35.26

Y49.25

X23.885

Y49.375

X29.5725

X30.0725

G40 X32.0725 Z1.375

Z1. F200.

G00 Z1.5

X15.6925

Z1.375

G01 G42 D4 X17.6925 Z.375 F999.

X23.38

Y49.25

X12.005

Y49.375

X17.6925

X18.1925

G40 X20.1925 Z1.375

Z1. F200.

G00 Z1.5

X19.6925 Y45.375

Z1.375

G01 G42 D4 X17.6925 Z.375 F999.

X12.005

Y45.5

X23.38

Y45.375

X17.6925

X17.1925

G40 X15.1925 Z1.375

Z1. F200.

G00 Z1.5

X7.8125

Z1.375

G01 G42 D4 X5.8125 Z.375 F999.

X.125

Y45.5

X11.5

Y45.375

X5.8125

X5.3125

G40 X3.3125 Z1.375

Z1. F200.

G00 Z1.5

X3.8125 Y49.375

Z1.375

G01 G42 D4 X5.8125 Z.375 F999.

X11.5

Y49.25

X.125

Y49.375

X5.8125

X6.3125

G40 X8.3125 Z1.375

Z1. F200.

G00 Z1.5

X3.8125 Y5.5

Z1.375

G01 G42 D4 X5.8125 Z.375 F999.

X11.5

Y5.375

X.125

Y5.5

X5.8125

X6.3125

G40 X8.3125 Z1.375

Z1. F200.

G00 Z1.5

X15.6925

Z1.375

G01 G42 D4 X17.6925 Z.375 F999.

X23.38

Y5.375

X12.005

Y5.5

X17.6925

X18.1925

G40 X20.1925 Z1.375

Z1. F200.

G00 Z1.5

X27.5725

Z1.375

G01 G42 D4 X29.5725 Z.375 F999.

X35.26

Y5.375

X23.885

Y5.5

X29.5725

X30.0725

G40 X32.0725 Z1.375

Z1. F200.

G00 Z1.5

X39.4525

Z1.375

G01 G42 D4 X41.4525 Z.375 F999.

X47.14

Y5.375

X35.765

Y5.5

X41.4525

X41.9525

G40 X43.9525 Z1.375

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N3

( 1/4 DOWN SHEAR )

( TOOL - 13 DIA. OFF. - 3 LEN. - 13 DIA. - .249 )

( 75-375 DADO )

T13

G00 G17 G90 G54 X47.0145 Y25.125

/ M13 S18000

G43 H13 Z1.5

Z1.375

G01 Y26.125 Z.375 F500.

Y47.1255

X47.0155

Y5.1245

X47.0145

Y26.125

Y26.625

Y27.625 Z1.375

Z1. F200.

G00 Z1.5

Y67.625

Z1.375

G01 Y68.625 Z.375 F500.

Y89.6255

X47.0155

Y47.6245

X47.0145

Y68.625

Y69.125

Y70.125 Z1.375

Z1. F200.

G00 Z1.5

X35.1345 Y67.625

Z1.375

G01 Y68.625 Z.375 F500.

Y89.6255

X35.1355

Y47.6245

X35.1345

Y68.625

Y69.125

Y70.125 Z1.375

Z1. F200.

G00 Z1.5

Y25.125

Z1.375

G01 Y26.125 Z.375 F500.

Y47.1255

X35.1355

Y5.1245

X35.1345

Y26.125

Y26.625

Y27.625 Z1.375

Z1. F200.

G00 Z1.5

X23.2545 Y25.125

Z1.375

G01 Y26.125 Z.375 F500.

Y47.1255

X23.2555

Y5.1245

X23.2545

Y26.125

Y26.625

Y27.625 Z1.375

Z1. F200.

G00 Z1.5

Y67.625

Z1.375

G01 Y68.625 Z.375 F500.

Y89.6255

X23.2555

Y47.6245

X23.2545

Y68.625

Y69.125

Y70.125 Z1.375

Z1. F200.

G00 Z1.5

X11.3745 Y67.625

Z1.375

G01 Y68.625 Z.375 F500.

Y89.6255

X11.3755

Y47.6245

X11.3745

Y68.625

Y69.125

Y70.125 Z1.375

Z1. F200.

G00 Z1.5

Y25.125

Z1.375

G01 Y26.125 Z.375 F500.

Y47.1255

X11.3755

Y5.1245

X11.3745

Y26.125

Y26.625

Y27.625 Z1.375

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N4

( 3/8 COMPRESSION )

( TOOL - 11 DIA. OFF. - 1 LEN. - 11 DIA. - .375 )

( 75 PERIMETER )

T11

G00 G17 G90 G54 X11.6875 Y24.625

/ M13 S18000

G43 H11 Z1.5

Z1.

G01 Z.995 F200.

G42 D1 Y26.125 Z-.005 F800.

Y47.125

G03 X11.5 Y47.3125 R.1875

G01 X.125

G03 X-.0625 Y47.125 R.1875

G01 Y5.125

G03 X.125 Y4.9375 R.1875

G01 X11.5

G03 X11.6875 Y5.125 R.1875

G01 Y26.125

Y26.625

G40 Y28.125 Z.995

Z1. F200.

G00 Z1.5

X11.8175 Y27.625

Z1.

G01 Z.995 F200.

G42 D1 Y26.125 Z-.005 F800.

Y5.125

G03 X12.005 Y4.9375 R.1875

G01 X23.38

G03 X23.5675 Y5.125 R.1875

G01 Y47.125

G03 X23.38 Y47.3125 R.1875

G01 X12.005

G03 X11.8175 Y47.125 R.1875

G01 Y26.125

Y25.625

G40 Y24.125 Z.995

Z1. F200.

G00 Z1.5

Y70.125

Z1.

G01 Z.995 F200.

G42 D1 Y68.625 Z-.005 F800.

Y47.625

G03 X12.005 Y47.4375 R.1875

G01 X23.38

G03 X23.5675 Y47.625 R.1875

G01 Y89.625

G03 X23.38 Y89.8125 R.1875

G01 X12.005

G03 X11.8175 Y89.625 R.1875

G01 Y68.625

Y68.125

G40 Y66.625 Z.995

Z1. F200.

G00 Z1.5

X11.6875 Y67.125

Z1.

G01 Z.995 F200.

G42 D1 Y68.625 Z-.005 F800.

Y89.625

G03 X11.5 Y89.8125 R.1875

G01 X.125

G03 X-.0625 Y89.625 R.1875

G01 Y47.625

G03 X.125 Y47.4375 R.1875

G01 X11.5

G03 X11.6875 Y47.625 R.1875

G01 Y68.625

Y69.125

G40 Y70.625 Z.995

Z1. F200.

G00 Z1.5

X35.4475 Y67.125

Z1.

G01 Z.995 F200.

G42 D1 Y68.625 Z-.005 F800.

Y89.625

G03 X35.26 Y89.8125 R.1875

G01 X23.885

G03 X23.6975 Y89.625 R.1875

G01 Y47.625

G03 X23.885 Y47.4375 R.1875

G01 X35.26

G03 X35.4475 Y47.625 R.1875

G01 Y68.625

Y69.125

G40 Y70.625 Z.995

Z1. F200.

G00 Z1.5

X35.5775 Y70.125

Z1.

G01 Z.995 F200.

G42 D1 Y68.625 Z-.005 F800.

Y47.625

G03 X35.765 Y47.4375 R.1875

G01 X47.14

G03 X47.3275 Y47.625 R.1875

G01 Y89.625

G03 X47.14 Y89.8125 R.1875

G01 X35.765

G03 X35.5775 Y89.625 R.1875

G01 Y68.625

Y68.125

G40 Y66.625 Z.995

Z1. F200.

G00 Z1.5

Y27.625

Z1.

G01 Z.995 F200.

G42 D1 Y26.125 Z-.005 F800.

Y5.125

G03 X35.765 Y4.9375 R.1875

G01 X47.14

G03 X47.3275 Y5.125 R.1875

G01 Y47.125

G03 X47.14 Y47.3125 R.1875

G01 X35.765

G03 X35.5775 Y47.125 R.1875

G01 Y26.125

Y25.625

G40 Y24.125 Z.995

Z1. F200.

G00 Z1.5

X35.4475 Y24.625

Z1.

G01 Z.995 F200.

G42 D1 Y26.125 Z-.005 F800.

Y47.125

G03 X35.26 Y47.3125 R.1875

G01 X23.885

G03 X23.6975 Y47.125 R.1875

G01 Y5.125

G03 X23.885 Y4.9375 R.1875

G01 X35.26

G03 X35.4475 Y5.125 R.1875

G01 Y26.125

Y26.625

G40 Y28.125 Z.995

Z1. F200.

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

(END OF FILE)

G91 G28 Z0 M92 M88B0 M89B0

M95

G17 G54

G08 P0

G90 G00 X50. Y100.

M30

%

this is the new non-drilling program;

%

O0000 ( NEW42 )

( DATE=DD-MM-YY - 11-09-07 )

G00 G17 G20 G40 G80 G90

M92 M88B0 M89B0

G54

G91 G28 Z0 M95

G08 P1

 

N1

( COMBINED DRILL BANKS )

( 75 LINE BORE )

M0 B496

G00 G17 G90 G55 X44.525 Y72.612

/ M13 S0

Z1.5

G98 G81 Z.4375 R1.25 F100.

Y66.3128

Y60.0136

Y53.7144

Y30.062

Y23.7628

Y17.4636

Y11.1644

X36.65

Y17.4636

Y23.7628

Y30.062

Y53.7144

Y60.0136

Y66.3128

Y72.612

X33.1

Y66.3128

Y60.0136

Y53.7144

Y30.062

Y23.7628

Y17.4636

Y11.1644

X25.225

Y17.4636

Y23.7628

Y30.062

Y53.7144

Y60.0136

Y66.3128

Y72.612

X21.175

Y66.3128

Y60.0136

Y53.7144

Y30.062

Y23.7628

Y17.4636

Y11.1644

X13.3

Y17.4636

Y23.7628

Y30.062

Y53.7144

Y60.0136

Y66.3128

Y72.612

X9.75

Y66.3128

Y60.0136

Y53.7144

Y30.062

Y23.7628

Y17.4636

Y11.1644

X1.875

Y17.4636

Y23.7628

Y30.062

Y53.7144

Y60.0136

Y66.3128

Y72.612

G80

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N2

( 1/2 STRAIGHT BIT )

( TOOL - 14 DIA. OFF. - 1 LEN. - 1 DIA. - .5 )

( 75-375 DADO )

T14

G00 G17 G90 G54 X7.6875 Y84.285

/ M13 S18000

G43 H1 Z1.5

Z1.375

G01 G42 D1 X5.6875 Z.375 F200.

X.125

Y84.425

X11.25

Y84.285

X5.6875

X5.1875

G40 X3.1875 Z1.375

Z1. F100.

G00 Z1.5

X19.3625

Z1.375

G01 G42 D1 X17.3625 Z.375 F200.

X11.8

Y84.425

X22.925

Y84.285

X17.3625

X16.8625

G40 X14.8625 Z1.375

Z1. F100.

G00 Z1.5

X31.0375

Z1.375

G01 G42 D1 X29.0375 Z.375 F200.

X23.475

Y84.425

X34.6

Y84.285

X29.0375

X28.5375

G40 X26.5375 Z1.375

Z1. F100.

G00 Z1.5

X42.7125

Z1.375

G01 G42 D1 X40.7125 Z.375 F200.

X35.15

Y84.425

X46.275

Y84.285

X40.7125

X40.2125

G40 X38.2125 Z1.375

Z1. F100.

G00 Z1.5

X38.7125 Y44.425

Z1.375

G01 G42 D1 X40.7125 Z.375 F200.

X46.275

Y44.285

X35.15

Y44.425

X40.7125

X41.2125

G40 X43.2125 Z1.375

Z1. F100.

G00 Z1.5

X42.7125 Y41.735

Z1.375

G01 G42 D1 X40.7125 Z.375 F200.

X35.15

Y41.875

X46.275

Y41.735

X40.7125

X40.2125

G40 X38.2125 Z1.375

Z1. F100.

G00 Z1.5

X31.0375

Z1.375

G01 G42 D1 X29.0375 Z.375 F200.

X23.475

Y41.875

X34.6

Y41.735

X29.0375

X28.5375

G40 X26.5375 Z1.375

Z1. F100.

G00 Z1.5

X27.0375 Y44.425

Z1.375

G01 G42 D1 X29.0375 Z.375 F200.

X34.6

Y44.285

X23.475

Y44.425

X29.0375

X29.5375

G40 X31.5375 Z1.375

Z1. F100.

G00 Z1.5

X15.3625

Z1.375

G01 G42 D1 X17.3625 Z.375 F200.

X22.925

Y44.285

X11.8

Y44.425

X17.3625

X17.8625

G40 X19.8625 Z1.375

Z1. F100.

G00 Z1.5

X19.3625 Y41.735

Z1.375

G01 G42 D1 X17.3625 Z.375 F200.

X11.8

Y41.875

X22.925

Y41.735

X17.3625

X16.8625

G40 X14.8625 Z1.375

Z1. F100.

G00 Z1.5

X7.6875

Z1.375

G01 G42 D1 X5.6875 Z.375 F200.

X.125

Y41.875

X11.25

Y41.735

X5.6875

X5.1875

G40 X3.1875 Z1.375

Z1. F100.

G00 Z1.5

X3.6875 Y44.425

Z1.375

G01 G42 D1 X5.6875 Z.375 F200.

X11.25

Y44.285

X.125

Y44.425

X5.6875

X6.1875

G40 X8.1875 Z1.375

Z1. F100.

G00 Z1.5

X3.6875 Y1.875

Z1.375

G01 G42 D1 X5.6875 Z.375 F200.

X11.25

Y1.735

X.125

Y1.875

X5.6875

X6.1875

G40 X8.1875 Z1.375

Z1. F100.

G00 Z1.5

X15.3625

Z1.375

G01 G42 D1 X17.3625 Z.375 F200.

X22.925

Y1.735

X11.8

Y1.875

X17.3625

X17.8625

G40 X19.8625 Z1.375

Z1. F100.

G00 Z1.5

X27.0375

Z1.375

G01 G42 D1 X29.0375 Z.375 F200.

X34.6

Y1.735

X23.475

Y1.875

X29.0375

X29.5375

G40 X31.5375 Z1.375

Z1. F100.

G00 Z1.5

X38.7125

Z1.375

G01 G42 D1 X40.7125 Z.375 F200.

X46.275

Y1.735

X35.15

Y1.875

X40.7125

X41.2125

G40 X43.2125 Z1.375

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N3

( 1/4 DOWN SHEAR )

( TOOL - 13 DIA. OFF. - 3 LEN. - 13 DIA. - .249 )

( 75-375 DADO )

T13

G00 G17 G90 G54 X46.1495 Y20.004

/ M13 S18000

G43 H13 Z1.5

Z1.375

G01 Y21. Z.375 F500.

Y41.8755

X46.1505

Y.1245

X46.1495

Y21.

Y21.5

Y22.496 Z1.375

Z1. F200.

G00 Z1.5

X23.6005 Y21.996

Z1.375

G01 Y21. Z.375 F500.

Y.1245

X23.5995

Y41.8755

X23.6005

Y21.

Y20.5

Y19.504 Z1.375

Z1. F200.

G00 Z1.5

X22.7995 Y20.004

Z1.375

G01 Y21. Z.375 F500.

Y41.8755

X22.8005

Y.1245

X22.7995

Y21.

Y21.5

Y22.496 Z1.375

Z1. F200.

G00 Z1.5

X.2505 Y21.996

Z1.375

G01 Y21. Z.375 F500.

Y.1245

X.2495

Y41.8755

X.2505

Y21.

Y20.5

Y19.504 Z1.375

Z1. F200.

G00 Z1.5

Y64.546

Z1.375

G01 Y63.55 Z.375 F500.

Y42.6745

X.2495

Y84.4255

X.2505

Y63.55

Y63.05

Y62.054 Z1.375

Z1. F200.

G00 Z1.5

X22.7995 Y62.554

Z1.375

G01 Y63.55 Z.375 F500.

Y84.4255

X22.8005

Y42.6745

X22.7995

Y63.55

Y64.05

Y65.046 Z1.375

Z1. F200.

G00 Z1.5

X23.6005 Y64.546

Z1.375

G01 Y63.55 Z.375 F500.

Y42.6745

X23.5995

Y84.4255

X23.6005

Y63.55

Y63.05

Y62.054 Z1.375

Z1. F200.

G00 Z1.5

X46.1495 Y62.554

Z1.375

G01 Y63.55 Z.375 F500.

Y84.4255

X46.1505

Y42.6745

X46.1495

Y63.55

Y64.05

Y65.046 Z1.375

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

N4

( 3/8 COMPRESSION )

( TOOL - 11 DIA. OFF. - 1 LEN. - 11 DIA. - .375 )

( 75 PERIMETER )

T11

G00 G17 G90 G54 X34.9625 Y65.175

/ M13 S18000

G43 H11 Z1.5

Z1.

G01 Z.995 F200.

G42 D1 Y63.675 Z-.005 F800.

Y42.675

G03 X35.15 Y42.4875 R.1875

G01 X46.275

G03 X46.4625 Y42.675 R.1875

G01 Y84.675

G03 X46.275 Y84.8625 R.1875

G01 X35.15

G03 X34.9625 Y84.675 R.1875

G01 Y63.675

Y63.175

G40 Y61.675 Z.995

Z1. F200.

G00 Z1.5

X34.7875 Y62.175

Z1.

G01 Z.995 F200.

G42 D1 Y63.675 Z-.005 F800.

Y84.675

G03 X34.6 Y84.8625 R.1875

G01 X23.475

G03 X23.2875 Y84.675 R.1875

G01 Y42.675

G03 X23.475 Y42.4875 R.1875

G01 X34.6

G03 X34.7875 Y42.675 R.1875

G01 Y63.675

Y64.175

G40 Y65.675 Z.995

Z1. F200.

G00 Z1.5

X11.6125 Y65.175

Z1.

G01 Z.995 F200.

G42 D1 Y63.675 Z-.005 F800.

Y42.675

G03 X11.8 Y42.4875 R.1875

G01 X22.925

G03 X23.1125 Y42.675 R.1875

G01 Y84.675

G03 X22.925 Y84.8625 R.1875

G01 X11.8

G03 X11.6125 Y84.675 R.1875

G01 Y63.675

Y63.175

G40 Y61.675 Z.995

Z1. F200.

G00 Z1.5

X11.4375 Y62.175

Z1.

G01 Z.995 F200.

G42 D1 Y63.675 Z-.005 F800.

Y84.675

G03 X11.25 Y84.8625 R.1875

G01 X.125

G03 X-.0625 Y84.675 R.1875

G01 Y42.675

G03 X.125 Y42.4875 R.1875

G01 X11.25

G03 X11.4375 Y42.675 R.1875

G01 Y63.675

Y64.175

G40 Y65.675 Z.995

Z1. F200.

G00 Z1.5

Y19.625

Z1.

G01 Z.995 F200.

G42 D1 Y21.125 Z-.005 F800.

Y42.125

G03 X11.25 Y42.3125 R.1875

G01 X.125

G03 X-.0625 Y42.125 R.1875

G01 Y.125

G03 X.125 Y-.0625 R.1875

G01 X11.25

G03 X11.4375 Y.125 R.1875

G01 Y21.125

Y21.625

G40 Y23.125 Z.995

Z1. F200.

G00 Z1.5

X11.6125 Y22.625

Z1.

G01 Z.995 F200.

G42 D1 Y21.125 Z-.005 F800.

Y.125

G03 X11.8 Y-.0625 R.1875

G01 X22.925

G03 X23.1125 Y.125 R.1875

G01 Y42.125

G03 X22.925 Y42.3125 R.1875

G01 X11.8

G03 X11.6125 Y42.125 R.1875

G01 Y21.125

Y20.625

G40 Y19.125 Z.995

Z1. F200.

G00 Z1.5

X34.7875 Y19.625

Z1.

G01 Z.995 F200.

G42 D1 Y21.125 Z-.005 F800.

Y42.125

G03 X34.6 Y42.3125 R.1875

G01 X23.475

G03 X23.2875 Y42.125 R.1875

G01 Y.125

G03 X23.475 Y-.0625 R.1875

G01 X34.6

G03 X34.7875 Y.125 R.1875

G01 Y21.125

Y21.625

G40 Y23.125 Z.995

Z1. F200.

G00 Z1.5

X34.9625 Y22.625

Z1.

G01 Z.995 F200.

G42 D1 Y21.125 Z-.005 F800.

Y.125

G03 X35.15 Y-.0625 R.1875

G01 X46.275

G03 X46.4625 Y.125 R.1875

G01 Y42.125

G03 X46.275 Y42.3125 R.1875

G01 X35.15

G03 X34.9625 Y42.125 R.1875

G01 Y21.125

Y20.625

G40 Y19.125 Z.995

Z1. F200.

G00 Z1.5

G91 G28 Z0. M92 M88B0 M89B0

M95

 

(END OF FILE)

G91 G28 Z0 M92 M88B0 M89B0

M95

G17 G54

G08 P0

G90 G00 X50. Y100.

M30

%

any help would be appreciated.

P.S. programs without block drilling run fine in X2.

Link to comment
Share on other sites
crazy^millman Veteran

crazy^millman

Posted
Posted

Have you contacted your dealer? They should be able to help you with this. It would also help if you put arrow like so <---- with a note to show your problem areas. Also cut out the non-important section when posting up to make your posting better understandable to those that might be able to help you out.

 

BTW welcome to the Forum.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...