.pim file to mastercam

[tonyc]

Hi guys, Im not sure if there is a way to import

a .pim file that was made when they used bobcad

into mastercam X2

Any advice would be helpful.

[Guest John Paris @ Services 4 Automati]

I believe you have have to get a different output file, IGES, STEP

[jeff]

IGES would probably your best bet.

[heeler]

I don't know if it helps, but our Motion Master routers with the xxxxor control use a .pim file for the G-Code. So you used to be able to use a reverse post and take it back to mCam. I haven't tried to reverse post anything in X or X2 so I don't know if you even can.

 

Glenn