Fanuc 3000C with G39 & vectors Post?

[Post dept]

Scott,

 

Yes, it's possible to do what you're looking for. We've done it for a customer of ours.

 

Brett

[Tim Johnson]

Take a look at the GE1050 post for your cutter comp vectors. It looks like you will have to get it from your reseller though. I think it was a stock post on version 9.

[Scott Garrison@Weiler Engineering]

Tim,

 

I'll let my reseller know. Thanks.

 

Scott

[Roger Martin from CNC Software]

Scott,

 

I'm not having much luck finding that (10yr) old post. I think it as for a Cincinnati that used P&Q vectors (similar concept as what you're looking for).

 

So...

If Brett is saying he can accommodate you - I'd give him a call.

 

 

Tim,

A 'stock post' with comp vectors? I highly doubt that.

[Scott Garrison@Weiler Engineering]

Roger,

 

Well, thanks for checking. I've been in contact with my reseller and he's looking into that GE1050 post. I'll see what he comes up with. The thing is my boss thinks he can get our reseller to do it for free. He doesn't understand posts enough to realize that that probably won't happen unless he can find a very good example and add it to the post I have. Even then it'll take some time. I'm sort of the monkey in the middle here.

 

I will definetely email Brett and get a quote on a post.

 

Thanks,

 

Scott

[Scott Garrison@Weiler Engineering]

All,

 

Our reseller is going through InHouse Solutions for this post. We are paying for it but it is definetely not an easy post. Should be the only one we need with major mods.

 

Scott