A post question for Mori NL1500/SY

[mandolinkgn]

We have a new Mori NL1500/SY and I'm having trouble in backplot/verify on sub-spindle live DRIll tools. They show backwards from sub-spindle live MILL tools. Everything posts good it's just backplot/verify that is giving me trouble.

For the sub-spindle using live tools (mill tools) it's programmed as if it was in a mill with Z0 being the face of the part and anything into the material is a - direction even though really it is a + direction. When posted the post reverses the signs and all is good.

Any ideas where to look in the post to find how to get the Mdrill tools to backplot/verify like the live Mill tools?

 

Keith

Xerox Modelshop

[GoetzInd]

Keith,

Try changing the wcs T/C plane to Left Side. Or try going into the mill turn settings in the tool parameters and select the right spindle as the active spindle.

 

Mike