When posting it starts updating

[mandolinkgn]

Here's a new problem to me. Running X2 MR2 and when I try to post it starts to run the X2 MR1 updater and install it. I have to hit the "cancel" button twice to stop it. How do I fix this?

Keith N.

[Sunder]

mandolinkgn

just change the NC editor

if you are using mastercam editor to view your NCcodes, just go to settings > configuration > start/exit> pull down editor dialog & select PFE32 and continue posting your toolpaths.

 

try a search so that you can find more answers to fix this.

 

this problem rises when you update mastercam or install in the same directory where you have had the older one, uninstalled V9 from the same directory.