REMOVING TOOLPATHS

[Michael1286490636]

WHEN I DO A TOOLPATH (CONTOUR, POCKET, ETC.) HOW DO i GET RID OF THE LINES WHEN I GO TO ADD MORE TOOLPATHS. I NEVER HAD THIS PROBLEM IN VER 8. S O WHAT AM I DOING WRONG?

[cadcam]

Mike , try this go toolpaths then hit "ALT" "T"

this will turn the paths off.

 

Do the same thought again and you can turn them back on.

[McRae]

Another mechanism of doing this is while in the operations manager right click on the sequence, select options from the dialogue box, toolpath display, on or off. This will show up as a greyed out NCI icon. By being selective on which toolpaths are visible, you can determine if depth cuts between sequences are correct etc. "Alt T" is a shortcut for accomplishing this (but will hide all toolpaths in the ops mgr.)

[Guest]

Another method is while in the operations manager hold down the shift key and click on the wave like icon next to the nci file path. This will turn on or off the tool path line for that tool path.