Peck Drilling

[Jake Statz]

We have a few Makino S56 machines that have pro 3 fanuc controls. my question is are these machines capable of peck drilling using reducing steps. For example having a first peck of.875 a reducing value of .250 and a minimum peck of .125. We are using Mastercam X2 Mr2 and are using a modified version on the mpmaster post. From what I understand this comtrol isnt capable of doing this, but I wanted to check to make sure.

[crazy^millman]

Make up your own Macro and then you can do it anytime you want just by calling up the Macro. Do a search the Macro was completely written out in a old post. Maybe 2 to 3 years ago.

 

HTH

[Columbo™]

Ron, I thing the board was cleaned up recently.

 

I did a search and found minimal stuff back to November 2006.

 

[Guest]

Try this thread

 

Linky

[Columbo™]

Thanx John