HELP with SUB ROUTINES

[Scott Bond]

Good Morning

I have copied a file(SUBRFTP1.MC9) to the FTP. It is only a portion of my part, but please post any results on thr FTP. I am reading some older threads and trying to get results as well as asking for help on my file SUBRFTP1.MC9.The current way is with macros from V7, I would like to use the best V9 option.

(I have not been able to get the macros to wotk)

 

I would like to start left to right.

 

I need tool 1 to cut all of the parts then tool2,and so on.

 

I am looking for the best method,with the least hand editing.

 

Can I use a common (mp) post?

 

Thanks

 

[ 05-01-2002, 12:25 PM: Message edited by: Scott Bond ]

[Scott Bond]

I down loaded the post off of the M.C. websight

and couldn,t any result but this ?

 

quote:

---

Combined Mill and Lathe Post Processor Version 9.00r © Copyright 1992-2002 CNC Software, Inc.

Processing file with RPFAN...Variable found, '=' or ':' expected.

Post line number 119

Program execution halted due to error(s) in .pst

---

I will keep trying

[Scott Bond]

UPdate

 

Unzip the file first! (then post)

 

I am getting clouser.

 

[ 05-01-2002, 01:03 PM: Message edited by: Scott Bond ]

[Scott Bond]

Ok I have it now.

Thanks Gcode

 

UPDATE;;;

My code is closer but it still doesn,t

look like what I need.

I have G54.G55,G56 and so on

 

The Komo has a G54 for home, and then

G52 with a distance from G54 for part1

G52 with a distance from G54 for part2

G52 with a distance from G54 for part3

and so on

 

[ 05-01-2002, 02:10 PM: Message edited by: Scott Bond ]

[cadcam]

Hay that was nice that the guy in the cubical (SP?P)

to help you.

 

good going Gcode.