Machine compatibliy warning ?

[Porkbun]

Machine does not have a programmable combination of linear/rotary axes to perform this operation

 

 

What is this? im not trying to do a rotary op or anything like it , it just wont let me do anymore ops on the part cause of this warning

 

 

Rich

wightman engineering

 

mastercamX mill X2 MR2 sp1

[Zoober]

Check your TC. Sounds like you are trying to machine multiple TC planes with a 3 axis machine/post

[3R!< W3NG3R]

I get this once in a while.

Just go to your file parameters in toolpath machine group and re select your machine.

That fixes it for me.

HTH

[Porkbun]

ummm whats TC ?

[3R!< W3NG3R]

Rob is talking about tool/construction planes.

[Porkbun]

and if I close mastercam and reload it works again .......doenst make sence

[3R!< W3NG3R]

Porkbun, did you try my suggestion? If it works after a reboot, then it isn't the TC planes.

[Porkbun]

i did i checked all the settings and made sure that things where right , but afer awhile it gets that error again

[3R!< W3NG3R]

porkbun, it will say you have the right machine there, but you have to re-select it anyway. Nothing will look like it changed, but it has. Try that next time.

[Porkbun]

ok thanks I think got it working