3R!< W3NG3R

Verified Members
  • Content count

    1,743
  • Joined

  • Last visited

Community Reputation

112 Excellent

About 3R!< W3NG3R

  • Rank
    Advanced Member

Recent Profile Visitors

1,676 profile views
  1. 3R!< W3NG3R

    Mastercam Lathe

    I think he's using Mazatrol. If so, change it from line to taper in the program.
  2. 3R!< W3NG3R

    Mastercam Lathe

    I think he's using Mazatrol. If so, change it from line to taper in the program.
  3. 3R!< W3NG3R

    Mastercam Lathe

    I think he's using Mazatrol. If so, change it from line to taper in the program.
  4. +1 Zoob I like the fact that a post mod like this is so fast and easy. You get what you want and what works for you.
  5. The safest way is in the post. Real easy to do.
  6. 3R!< W3NG3R

    is it possible to do this?

    Download Cura for free and try that
  7. 3R!< W3NG3R

    Dynamic xform to compound axes feature

    Short answer, yes. There is a button to change from gnomon manipulation to geom manipulation. You need to toggle back and forth as necessary. It's hard to explain without seeing what you want to do and not showing you. This is one of my favorite functions in MC
  8. 3R!< W3NG3R

    Select only wireframe (really!)

    This has been a nagging issue with me. I have to toggle the solid layer on and off all the time to get things done.
  9. 3R!< W3NG3R

    Changing tool number in MasterCam 2018

    You think changing the tool number should cause a forced regen?
  10. 3R!< W3NG3R

    Recent Files

    It doesn't work as nice as it used to.
  11. 3R!< W3NG3R

    Collision Detection

    If you use feed moves instead of rapid, verify won't stop or see a collision.
  12. 3R!< W3NG3R

    Dynamic Mill tool paths not leaving stock.

    these toolpaths do this all the time. You have to go back in and change things and regen. I usually change the stock to leave number by a little bit
  13. 3R!< W3NG3R

    I seem to have lost Highlight Geometry in 2018

    Sadly, no. It just sucks to pay all this money and then get less for it.
  14. 3R!< W3NG3R

    I seem to have lost Highlight Geometry in 2018

    Crap! now I want that feature. It would be so handy What John showed is good too, but not the same.
  15. 3R!< W3NG3R

    I seem to have lost Highlight Geometry in 2018

    I've never used that. Would have been handy though. unless you mean when the geom window is open. Did it highlight also when the operation was selected?

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us