No matching op file on open

[Chris Rizzo]

I've got a student having an error "no matching op file find". Using .emcx. This is the only instance of this happening, other files work fine.

[Slydman]

I know it's a bit late for the answer, but this morning i had this message 'No Matching Op File' on file open and after merging files also.

 

I did a search and found many thread regarding this issue and tried many thing to fix this but no luck.

 

I found that when i open a session of mastercam by clicking directly on the mcx (file A), it seem that i have 'No Matching Op File' message when i try to merge another file that contain solid entities (file .

 

If i open a mastercam session (not part file) then in mastercam i click on 'open' the same file (file A) and then i merge the other file (file i have no problem and no message.

 

It seem to be in this workaround.

 

Any other people had this issue? or am i wrong?

 

Any other idea are welcom!

 

Thanks for the help.

[FAS]

I've noticed that size of merge file has somtimes had something to do with it. Merging large into small sometimes triggers it. Another work around is to create a dummy solid enveloping your original then merging the dummy in.

 

M2C,

 

FAS

[Joeyls319]

Usually when I get a "no matching op file " it means that a solid is missing some geometry used to create it (through deletion or moving the solid around).