super slow regen

[kazmir44]

I just opened a version 9 lathe file in x2mr2sp1 that was programmed by someone else.

When I regen the ops, its like its backplotting, but super slow. It probably would have taken 10 minuted just to regen the toolpaths.

Does anyone know why this is happening and how to change it back to normal.

It's only on this file. All others have worked fine.

[Guest]

I am going to bet that file was NOT originally a V9

 

I'll venture to guess is was a V7 file

[kazmir44]

So there is no way around this

[HT]

Check if tool display are check .It will run faster if it not.

HTH

[kazmir44]

That worked.

I knew there had to be some way around this.

 

Thanks HT