changing pmc parameters

[veritasproject]

changong pmc parameters on a fanuc mate w/ an oi control any help?

[Dave Ball]

What parameter are you interested in changing and what is it you think it will get you.

[veritasproject]

k11.7 from 0 to 1

when m00/mo1 is specified, the saftey door is unlocked

[Guest CNC Apps Guy 1]

Enable PWE,

 

Press the System button, press the right arrow Soft Key until you see somethign with PMC in it I believe, then you press the PMC Soft key, then the KEEPRL SOft Key and that's your Keep Relays.

 

It's different for pretty much every machine because the builder sets up the HMI.

 

I'll assume you know bit 0 is the furthest bit to the right and bit 7 is the furthest to the left.