coolant always in v9 mode mpmaster mcamx1

[chatelch]

Hi i have a probleme.

Is there a way that option

support coolant using coolant value in post-processor

(provides backward compatibility for old posts)

 

stays active every time I create a new file or activate my post mpmaster for mastercam x1

 

I use to have a homemade tool library witch was created in the old mpmaster v9 witch I converted to mastercam x1 using the update application provided by mastercam. The probleme is i dont want to change all my library to fit the new mastercam coolant setting i love does v9 settings...is there a way that mpmaster for mcamx1 can by default keep the option activate

 

also in the control definition- tool to keep tool offset register at add to tool 0 and 50

 

 

thx for any reply

[Mike S @ S4A]

the retro coolant support command is in the general parameters of a machine definition.

Edit the "library" copies of your machine defs if you wish to default this.

The library control definitions can be edited to

make permanent the T# = H# and D# = T# + 50 conditions

[3rdstring]

In design mode

 

Settings >> Mach Def Manager >> (Your Mach Def) >> General Mach Parameters (blue icon) >> coolant tab.

 

Set it here & it should stick.

 

Settings >> Mach Def Manager >> (Your Mach Def) >> Control Def >> Tool

 

HTH

[chatelch]

thx 3rd string i figured it out didnt see the mach type mach definition manager