drill cycle post help please

[TomHemphill]

I have been working on a DX32 Bridgeport post with help form you guys and have made good progress however the latest problem has me stumped When I post a drill cycle this is what I get

code:

---

N10 G75 G90

N20 G0 G54 X0. Y0. T5 M06

N30 G0 X2.6875 Y2.6875 S2933 M03

N40 M08

N50 G0 Z2.

N60 G87 X2.6875 Y2.6875 Z1.1039 Z.1 Z.1 F8.7

N70 X-2.6875

N80 Y-2.6875

N90 X2.6875

N100 G80

N110 G00 M25

N120 X0 Y0

N130 M2 M9 M5

---

the drill rapids to about z+1.5 then pecks to the z +1.1039 instead of going to z-1.109

here's what my drill cycle looks like in the post

pchpbrk$ # Canned Chip Break Cycle

n$, *sgdrill, *x$, *y$, *depth$, *peck1$, *peck2$, *frplunge$,e$ What do I change? I have tried the other cycles and can't get it to post a neg z depth... depth is set to -1"+ tip comp

Thanks,

Tom

[Chris Parish]

make a variable of depth = depth*-1

 

but make sure you reset it back.. so your other "Z" values don't invert the number

 

If you need help... please e-mail me.. I have done a couple of posts for these controls

[Storkman]

What's with all the posts lately Chris?

 

You guys ain't got nothin' to do?

[Chris Parish]

Storky:

 

I just replied on your (developers forum)..anyway I have been in the office a lot lately... Everyone wants to buy but waiting ...typically answer ...so I have been doing a lot of post writing / tech support /... etc etc

[TomHemphill]

Chris,

You have mail...Thanks

Tom

[TomHemphill]

Thanks to Chris Parish for going above and beyond the call for someone he didn't even know

Everything worked out great

Tom