Pro drill add on

[Jack Neelands™]

Anybody using prodrill with their mastercam?

Im having a bit of trouble getting it to recognize a view from the beginning ...front view in particular.

 

Thanks

[Rick Henrickson The Boeing Co.]

Hey Jack when colin gets in he will be able to help you out he will be here soon

[Jack Neelands™]

Thanks Rick

[Colin Gilchrist]

Is your geometry truly planar to the front view? This is the only case where it has failed on me in the past. What version are you running? The last one I tried was V2 SP4, but I think they are a few versions up from that one now. We finally go it to work for circle milling our holes, but we are waiting for the purchase order to go through on our maintainence so we can implement ProDrill as our standard process.

 

Try writting to s u p p o r t m o l d p l u s . c o m

 

without the spaces and using the @ symbol.

 

Anbu should be able to help you out with your issue. He is a great guy to work with. Very responsive.

 

HTH,

[Jack Neelands™]

Thanks Colin....found out from inhouse that my tolerance was too tight

 

I am also having a problem getting Prodrill to recogonize multiple offsets on the same plane to output G54.1 Pxxx when working with a tombstone with multiple parts stacked ...so Im just manually putting things together right now ...better than nothing

 

Thanks for your Help