Missing end mills in nc output.

[MotorCityMinion]

I'm missing the e-mills in the tool list at the heading of my nc file. Drills, reamers and taps show up fine. The e-mills appear at the start of the machining sequence, code is also good. What did I mess up? MPmaster is the post.

[Guest]

Well, let's ask this, what have you changed in the ptooltable section?

 

It seems strange because that section does not differentiate between tool type it only lists out the tools used. It makes me wonder if you have

 

code:

---

tool_table  : 1     #Tool table, 0=no, 1=yes, 2=Predator VCNC, 3=MetaCut View

---

set to 2 perhaps and then have turned something off in the ppredtool section

 

Some more information of what and how you are set up to output your tool list is going to be needed.