Changing work Offset for 1 toolpath group

[Mic6]

So I Have 3 toolpath groups in my ops manager. I select the first toolpath group and all 5 operations have checkmarks. I right-click on the toolpath group name which I just selected and choose "Edit Selected Operations>Edit Common Parameters" Under planes I change the work offset to 1 for G55 and it changes all my toolpath groups to this new work offset. Is there a way to change only 1 toolpath group at a time? I also had the insert arrow under the last op in the toolpath group I wanted to change. Thanks in advance

[Guest]

How about select the ops you want to change and right click >> edit selected operations >> renumber work offsets

 

will that work for you?

[Jayson Kramer]

[Mic6]

Hmm, Doesnt seem to be doing anything. All the operations in the toopath group I want to change are selected, but nothing happens.

[Jayson Kramer]

Ok are you picking the planes and setting them for 1 and then clicking on the Green check, then going to the window I posted and picking the apply then the green check? try the oder and see what happens you should have to regen and see in the op that it is changed.

 

[ 08-14-2008, 11:32 AM: Message edited by: Jay Kramer @ Precision Programming ]

[Mic6]

Hmm, pictures arent showing, but I'll try it again