CORNER FEEDRATE

[Casey Hewes]

I AM HAVING A PROBLEM WITH MASTERCAM AND BIESSE AGREEING TO WORK TOGETHER. WHEN A 90 DEGREE CORNER COMES UP MY MACHINE SLOWS DOWN AND MAKES THE CORNER. BUT WHEN I GO TO DO A DIFFERNET ANGLE SUCH AS A 22 DEGREE THERE IS NO SLOW DOWN AND CAUSE THE MACHINE TO VIBRATE PRETTY GOOD. IS THERE SOME KIND OF C HOOK OR SHORT CUT TO FORCE THE MACHINE TO SLOW DOWN IN ALL CORNERS AND NOT JUST 90 DEGREE ONES?

[Tony35]

ahhh my EARS

[KalCam]

Ear plugs in

 

Are you using highfeed? if so you should be able to change your angle on the machine dynamics tab. This is found in the general machine parameters.