trouble installing X3

[John13]

Trying to install X3 from download on my laptop and keep getting this warning

 

 

Error applying transforms. Verify that the specific transform paths are valid

C:WINDOWSInstaller{C09EBC22-19CF-4678-BAFB-46EAB02261D3}1033.mst

 

Any ideas what to check? I've tried 3 different registry cleaners and see no mention of Mastercam in the registries.

 

The only thing I saw was the Mastercam X icon in the control panel, and that didn't do anything before X2 was installed

 

I re-installed X2 with no problem, tried installing X3 from the disk this time and get the same warning.

 

Thank for any help

 

[Don S at Barefoot CNC South]

It may just be a LITTLE problem.

Might be a bad cd

[iowajim62]

keeb,

here's another to try

http://support.microsoft.com/kb/290301

[John13]

Did it with the web download and CD Don,

 

Already tried that 1 Jim.

 

 

thanks anyhow.