sequence numbers

[veritasproject]

i need to set the sequence numders at the tool change only

any help?

[X-L Engineering Corp]

in your post this is from an MpMaster Mill

 

tseqno : 1 #Output sequence number at toolchanges when omitseq = yes

#0=off, 1=seq numbers match toolchange number, 2=seq numbers match tool number

[veritasproject]

in tring to edit a Generic Fanuc 4X Mill and i can not fide that line in the post

[gcode]

quote:

---

in tring to edit a Generic Fanuc 4X Mill

---

That is a feature offered by the In-House mpmaster post.

See Post at the top of this page

[veritasproject]

thank you

[Guest]

It can easily be done in the Generic 4 AX post

 

find your tool change calls in the psof and ptlchg$ sections

 

Place a * in front of the n$, like this

 

code:

---

pbld, *n$, *t$, sm06, e$

---

The go into the Setting >> control def >> NC Output, uncheck support for sequence numbers and set your starting value and increment value there.

 

You'll then have it outputting N numbers only at tool changes

 

hth