Quote needed

[MattW]

This one is probably pretty easy for you 5-axis guys, a 4 axis approximation would probably be OK. Both are beyond my capabilities right now. 300 series CRES, .020 wall thickness, about 1.3 inches across the top. Email me for a parasolid if interested.

 

[MattW]

Also, looking for something like 5 -10 pieces.

[Guest]

about a $100.00. yeah definitley about a 100.

[Kevangel]

Seriously, what would something like that cost?..no mention of tol. which would change everything.

[MattW]

Programming from the model should be plenty good enough. Within .002 on thickness should be sufficient. We are experimenting, and need some parts for testing. The part needs to be cheap enough to be disposable, or robust enough to tolerate cleaning in an autoclave or mega-dishwasher.

 

I forgot to mention earlier, electropolished.

 

Here is a part I made from Delrin, which worked pretty good, but plastic is going to be unacceptable for the application.

 

[Trevor Bailey]

matt...contact Chris Taylor @ 5th axis CNC. they specialize in parts like this. They are also only about 15 minutes from you.

 

Phone: 858-505-0432