Fixture placement on work page

[Lance Robinson]

I would like to know if anyone out there has fixture designs that I could up load in the wok page. Such as vice> tombstone> rotary table anything that will show fixture holding stock. If anyone has something I could upload that would be great send it to me at [email protected]

[[email protected]]

You have mail

[Ron Branch @ Verisurf]

Have you looked on the FTP there is a ton of stuff on there already. Also Jergens, Carr-Lane have a bunch of free stuff as well.

[Lance Robinson]

Holycow that was quick! Thank You so much As I am a rookie. I will try and look before I ask next time. Don't mean to step on anyones toe's.

I am a student with MC3 I have been a machinist for over ten yrs I am tring to learn this on my own and it is not easy for sure yet I hope it can get me back to work

.SO THANKS FOR THE HELP********

[[email protected]]

You're welcome and welcome to the forum.

[Hardmill]

Welcome to the forum Lance.

 

 

PEACE

[Ron Branch @ Verisurf]

Lance you have mail. Anyone else I put a file on the FTP with some solids I have done over the years on it. Some I got from other web sites. It is called Free_Solids.ZIP in the unspecified_uploads folder on the FTP.

 

HTH

[[email protected]]

Thanx Ron,

hijack: What days do you work @ Verisurf?

I need to call you about some info

[Justin Beebe at Folsom Tool]

Go to the Kurt website and you can download free 3D models of all of their workholding equipment. They can be downloaded as parasolids.

[Tim Martinez]

Ron works on Tuesday and Thursday.