Help I have a small brain ! (router question)

[Scott Bond]

What is nesting?

Will I be able to make 1 part in the Mastercam, and let the software place the parts in my stock for me?

I want to end up with a program that has one G52 part home for the stock, and then each part has a differant M98Psomething.

 

T102

G54X0Y0S18000M3

G43H1.M8

N0001G52X3.95Y6.7443

M98P2695

N0002G5218.2443

M98P2695

N0003G5229.7443

 

AND SO ON

 

Jay, James, and Team

Does this product exist for us?

How do I get one of these?

 

[ 07-02-2002, 11:02 AM: Message edited by: Scott Bond ]

[cadcam]

Hi scott . yes we have a nesting software.

Call me later or tonight at class And i will give you a cost.

This can be add to Mill not just for router.

later jay

[Bullines]

Here's a start:

 

http://www.emastercam.com/products/nesting.html

[Guest CNC Apps Guy 1]

They said it.

[ProductDevelopmentGuy]

Scott, et al,

 

Coming soon in V9.1 - "Toolpath Nesting". Define a toolpath and nest it, rather than defining the geometry, nesting it, and then putting a toolpath on everything. It'll work very much like the Toolpath/Transform functions.

 

PDG

[Scott Bond]

Thanks PDG

I will look foward to it.