Yellow clock in ops manager?

[MotorCityMinion]

Anybody here ever have a yellow clock appear in one of there ops? The op says it's dirty, but no red X appears and it does'nt regen. This occurred after a op import on a new file.

[Colin Gilchrist]

Click on the Question mark in the operations manager. Then in the Help dialog box, click on the hyper-link for "Toolpath Manager quick reference".

 

At the bottom of the list of icon is the clock. From the help entry:

Batch - Operation has been marked "to Batch" on the Tool parameters tab in the operation parameters dialog box. "Batch" means to set the operation to batch mode, to be processed separately from other operations using Mastercam's batch processing utility. (Not available in Mastercam Wire.) Please see Batch processing toolpath operations for additional information.

 

Basically there is a "To batch" check box in the lower left hand corner of the "toolpath parameters page in every operation. Make sure that check box is not checked...

 

HTH,

[MotorCityMinion]

Sounds good. Thanks.