Is Your Verify Slow ?

[Jason B.]

I just received an email (The quarterly "Shop Talk" from Mastercam) and it points out that if you have an arbor diameter a different size than your tool diameter called out in your tool settings dialogue that it will cause your verify to run much slower than if not. They site an example as 25mm arbor with 24.96mm diameter took 11 minutes and both at 25mm took only 2.5 minutes. I know some of you have mentioned problems with verify taking so long and I don't know if all of you get this quarterly so I thought I should pass this information along in case it will help someone here. Good luck.

 

- Jason

[neil qwerty]

Hadn't heard that, thanks for sharing.