Yes, contact In-house. That's where I got mine from, it's a small file that can be emailed.

I ran into this a month or so ago, there is a patch you need to run to fix this problem. Contact your dealer, they can hook you up.

Thanks guys, we did find a way to do it in edit but we can't restart from there. You have to exit edit then search for the block number and start from there.

We have a Mitsubishi Meldas 500 control attached to our OKK VMC. Our operator informed me the other day that this control does not have the ability to search through a program (say if you wanted to find the next tool change). Is this true? I don't like to question the guy but I just find this hard to believe. Thanks for your input. Neil.

quote: Ken, I just quit using our Co. Logo....it looked cool, but we all know where we work Same here, small price to pay for such a great setup sheet.

Ken, are you posting to a network drive? Try posting locally. I know it sounds strange but I think I can across this before.

Still pretty cool that you can dimension it though.

That would be something if this is true, Gary can you please recheck your procedure and confirm that this works. I'm assuming you're talking about a block with some holes or pockets, no 3d surfaces.

Sorry Ray, it can't be done without some kind of stl to surface software.

Hey Hardmill, I've got a seat of Fastblank and a seat of AutoForm if it's a sheet metal part you need help with. Neil.

It leaves material per side, so yes for a bore it will leave .002 total. Neil.

Thanks Gcode I already tried them,those aren't the original drivers.

Hi John, xp 32 and 64 bit (dual boot) with UG. I can download the new version for it but the original driver and control panel works better.

Can anyone help me out, I'm looking for the original driver that came with our Spaceball 5000 (serial). The latest ones off of the 3dconnexion site don't work as well as the original ones but I can't find the disk. Can someone upload it to Megaupload or put it on the FTP site. Thanks, Neil.

quote: PS ... does anyone ever mess with these parameters? The only thing I've changed in the parameters is to disable the splash screen, this makes Mastercam boot much quicker.