vericut.dll

[JayMan]

We have recently switched from Mastercam v9 to X3, We also have Vericut 5.4.2, We have always had a chook called vericut that alowed use to run a mastercam v9 file through it, now that we have switched to x3, that same chook does not work, anybody have the info I need? Sure would appreciate it

[gcode]

Vericut install saves a copy of all the interface stuff

In my 6.22 install its here

C:cgtech622windowsmcamvX3Vericut.dll.

I don't know if you'll find one for X3 in a 5.4 install. You may need to contact your Vericut dealer

[kwolf]

Check the CGTech forum first.

I know they updated c-hook and fixed some bugs for mastercam and bunch of CAM packages interfaces after releasing v6.1.2

 

http://www.cgtech.com/forum/viewtopic.php?...mastercam#p2888

[kwolf]

Oh 5.4?

I think you have to upgrade Vericut to 6.1.2+ then.

[Rob @ Target Machine]

Oh, thanks.....I was looking for that since we moved to X2.

 

 

X2Mr2Sp1

Vericut 6.2

SW2008Sp4