cursor color

[fred norris]

My cursor is very difficult to see. I cannot find a way to change the color in configs. Help would be appreciated. Thank You.

[Guest]

You'll need to change your background instead.

 

Cursor size in Mastercam has been fairly heavily requested

[Josh Kinney -Elite Engineering]

this is a windows "theme" setting in the display properties on your desktop.

[Guest Tyler Yanta]

Josh is correct.

 

There are quite a few cursor options included with Windows. Just go to your Control Panel > Mouse > Pointers tab. (Depends on operating system of course)

 

You can change colour, size, shape etc.

 

In the next tab over, you can tell it to show you where your cursor is when you hit the Ctrl key.

[fred norris]

changing the mouse pointer in the control panel does nothing for the crosshairs in mastercam. I'm sorry if I didn't make sense in my post. My crosshairs are gray and very difficult to see. I've used them like this for a couple years, but it would be nice to be able to see them better.

[Code_Breaker]

Setting ==> Configuration (alt-F8) ... then under Color pull slider to bottom and select System origin color and pick your color.

 

HTH

[Jack Neelands™]

Face it ...your going to have to get some reading glasses from the dollar store....

[fred norris]

Believe it or not, I actually have better than 20/20 vision naturally. I'm not as old as I look. haha.