Mirror issue

[left coast lefty]

When I use transform mirror on an already mirrored event, this: web page

 

Looks OK, but the toolpath does this:

web page

 

I set the control definition to do multiple nesting. Any ideas?

[Guest]

Yup, don't mirror toolpaths, mirror geometry fine but reselect for your toolpath.

 

Been issues trying to do it for eons

[left coast lefty]

Thanks, John.

[MotorCityMinion]

Drilling toolpaths will mirror fine. Anything chained seems to get messed up.

[PeterDnz]

I've only just started using Toolpath Nesting. I've always nested geometry. However I have the opposite problem to what MotorCityMinion says.

I have Transform/mirrored a toolpath with chained entities and drilling, simulates fine, then nested the original and mirrored toolpaths. The drilling ops from the mirrored part are dropped from the selected operations cluster and only simulate in the nesting operation not the nesting result.

Any ideas?

Pete.