Operations Manager window moving around

[connormac]

I am running 2 monitors. When I open X4 I have the drawing window open in the left window and the Op manager open in the right window. Works great every time. BUT if I minimize X4 then maximize it, the Op manager shifts over to the left monitor. It worked correctly in X2 but started having the problem with X3 and X4.

I'm tired of dragging it back over to the other screen all the time. Is this happening to anyone else or is it something to do with my computer?

[strabe]

It may depend on what you have set up as your main or primary monitor. I have mine set up opposite of yours. So when I first launch MC it comes up in my left (main or primary) monitor. I move it to the right (larger) and my ops manager is in my left. No problems. I believe the ops manager is set to default to the left side of the drawing window when running one monitor so this may be your problem.

 

HTH

[connormac]

So I need to test this theory by swapping my monitors around and change the settings and see if that fixes the problem.

[strabe]

I think it will work for ya. I know it's a hassle but if it works...

[connormac]

Thanks for the advise will try it Monday.