Converting Splines to Arcs in X3

[BillKobernus]

Topic says all. I thought this became auotmatic in X3 but I guees not.

 

When I scale a model, in xyz mode, i.e. x 1.005 y1.005 Z1.005, that has lines and arcs it turns all arcs into splines. How do I convert then back into arcs? in V9 it was a funtion in "Modify". Where is it now?

 

 

Thanks for your help

 

Bill Kobernus

[Joe788]

Edit > Simplify

[BillKobernus]

Thanks Joe. I'll try that!

[Jack Sierra Cad/Cam]

I you go to you start button/ all programs/ Mastercam X3/ Documentation, you will see a Version 9 to x function map your question is answered there.