Jack Sierra Cad/Cam
-
Posts
67 -
Joined
-
Last visited
Jack Sierra Cad/Cam's Achievements
Newbie (1/14)
0
Reputation
-
talk to your Reseller it sounds like you need to install the Microsoft hot fix for 64 bit systems. Or try to find it your self on Microsoft web site
-
yep my whole office is on Mac. Pc runs better/ faster on a mac os then it does on its own.
-
Can someone please reply with the link to X+ download. Thanks
-
Is "peel mill " for open slots only ?
Jack Sierra Cad/Cam replied to mig's topic in Industrial Forum
If you go to the mastercam help and search for Peel Mill. It will bring up a description of peel mill and how to chain it. Hopefully this will help you understand how to use it properly. -
First Tool Comment Posting Issue
Jack Sierra Cad/Cam replied to huskermcdoogle's topic in Industrial Forum
Try going to your operations manager/ under machine group properties/ files. At the bottom you have options to output operations or comments to NC. -
Is "peel mill " for open slots only ?
Jack Sierra Cad/Cam replied to mig's topic in Industrial Forum
What is the problem your having? -
Did all of the bugs get fixed in X2 when they did 2 Maint. releases? Im pretty sure not. More downloads= more chaos = waste of time
-
Are you on a network? If so you may have to log in as administrator to get the system to read the disk.
-
Delay in accessing toolpath parameters new to x4
Jack Sierra Cad/Cam replied to Chris Rizzo's topic in Industrial Forum
Check to see if your multi threading option is on in your settings/ config/toolpaths. I've found if its left on and not in use it slows the system down considerably and crashes verify occasionally. -
Are you using the new multi threading option? If not be sure it is disabled in your settings/ config/toolpaths. its defaulted to ON. I've found that it slows/ crashes verify when its left on.
-
Try getting the file as an IGES. I've had the same problem when trying to open dxf from Pro-E.
-
Mu1 will be available to your employer depending on when they let there maintenance go.
-
quote: At my last job i went to x3 but becuase of some bugs decided to stay with x2 mr2 sp1. It sounds like your taking 1 step forward and 2 steps back... If you can down load the Mu1 patch for X3 it works well and theres not all that much of a learning curve.
-
R.EX Did you try to toggle your accelerator settings?
-
Check your Graphics accelerator Settings, Config, Screen A lot of your computers need to to have it disabled/enabled to fix this problem. Many of you say its Mastercams Problem but did anyone of you stop and think uh maybe its a graphics card problem because my computer is 5 years old...