Post help please

[pip]

I need to lose 1 line of code, out of my posted file, It posts the same move twice, once in the header and again at the start of the contur. Is there a post command to skip a line when NCI is being read?. After the Z command I dont want it to output the next line of code, but to skip one line and go straight to the G41 line

 

Posted code;

 

O9000

G1 X-20.5 Y7.

G1 Z[-6+#2002]

G1 X-20.5 Y7.

G41 X-20.5 Y-1.

G3 X-12.5 Y7. R8.

G1 X-12.5 Y7.5

G2 X-7.5 Y12.5 R5.

G1 X7.5 Y12.5

G2 X12.5 Y7.5 R5.

G1 X12.5 Y-7.5

G2 X7.5 Y-12.5 R5.

G1 X-7.5 Y-12.5

G2 X-12.5 Y-7.5 R5.

G1 X-12.5 Y7.5

 

What I need;

O9000

G1 X-20.5 Y7.

G1 Z[-6+#2002]

G41 X-20.5 Y-1.

G3 X-12.5 Y7. R8.

G1 X-12.5 Y7.5

G2 X-7.5 Y12.5 R5.

G1 X7.5 Y12.5

G2 X12.5 Y7.5 R5.

G1 X12.5 Y-7.5

G2 X7.5 Y-12.5 R5.

G1 X-7.5 Y-12.5

G2 X-12.5 Y-7.5 R5.

G1 X-12.5 Y7.5

X-12.5 Y8.

 

Thanks in advance

[Ron Branch @ Verisurf]

Without seeing those sections of the post will be real hard to help you. Post up the pheader or where you think they bot hare coming from and then we can see about helping you. I am thinking you got some pf or * somewhere that is doing this.

 

HTH