G68 errors

[mayday]

not sure what the root cause is yet but worked fine in X2. I program for the rotary to be on the right side for thr Mori's but if it needs to go on the Mazaks I insert the G68 at tool change for indexer on the left. I'm getting random gouging in surface passes that dont show in MC. If I turn off all filtering it seems to fix it. I was only outputing filter in the XY plane also.

[Ron Branch @ 5th Axis]

Sounds like dog Legging might be going on. The Mazak might be processing Rapid moves different than the Mori.

 

HTH

[mayday]

Ive been working on the MPmaster for the Mazaks. how do you activate G68/G69 in the op manager