Custom groove tool

[mayday]

trying to take an NG-3094L and change 1 corner rad from a .015 to a .03 rad for a contoured face groove. cant get MC to recognize to 2 different rads. it totally ignore the .03 radius. Even saved the geometry from the lib and changed the rad. same thing.

GGRrrrr

[calnet42]

Mastercam cannot do 2 different rads on one insert.

 

The only wat I could do this was to draw the tool correctly, let mastercam set it's rads then modify the part geom to cut correctly.

 

I could send you a file, if you need it.

[mayday]

Thanks but i got it to work