Hangup after Operation Creation

[huskermcdoogle]

Guys I have a file that is 200+ operations long, mostly they are all transform operations for a tombstone. Anyway, after I am in the operation parameters screen it will hang up for about 10 seconds after I close the parameters dialog. Then I can continue. This pause is really really bugging me. I also will hang for about 2 minutes when I save. The file size is about 12 MB. Is there anything I can do to improve this? When it is sitting there one of the processor meters it pegged and task manager says it is using 50% processor.

 

X2 mr2 sp1

 

centrino duo

quadro fx 2500m

4 gig ram

 

 

Husker

[Leigh @ Kodiak]

I had this problem back in X2 as well. I believe it had something to do with using transform ops, as the more I added, the more lag I got. The problem seems to be fixed in X4, and I think it might have been OK in X3 as well.

[huskermcdoogle]

Well Poop. That puts me between a rock and a hard place....

 

I have maint to go up to x3 for my hasp but not all of my coworkers do, so I can't go up. Well guess I have some fuel to go after updated maint for us.

 

Husker