unable to find machine zone

[lovemachine]

I have loaded the file to the ftp.

I have programed the part on the left but the part on the right gives me no vaild machine zone.

The data sould be the same just rotated.the parameters are there and the red x on the scallop toolpath that I'm having a problem.

It's just driving nuts what i doin wrong.

 

Any suggestions to any and all parts of the program accepted.

 

Thanks Bob

 

BTW: the file is 1575 4th form die In the V9 dir.

 

[ 08-09-2002, 12:46 PM: Message edited by: lovemachine ]

[perfecseal mankato]

When looking at this file,

the part on the right side

the depth limits are set. The left side

they are not set. turn off depth limits

and it works fine.

Hope this will help

[lovemachine]

thats what I started with and it gave me the error 3 times so I changed it. I will try it again tomorrow.

If it worked for you might be a comp problem been kinda touchie lately.

 

Thanks for the help