pocketing

[kyle]

I have a problem with v9 sp1, when pocketing with islands it always gouges, I have tried all types of pocketing such as zigzag,etc. and all end up gouging. What I have is say a 3 by 2 inch box with three .750 bosses in center and gouges on the bosses everytime. I am sure it is not something I am doing, I saved the identical file as an mc8 and did same way in v8.1.1 and did exactly what I wanted with no gouges. I would appreciate any help.

[Thad]

This recent thread discussed a similar issue. Perhaps it will help?

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=003605

 

Thad

[kyle]

Is this something cnc software is aware of? I am running the latest update as of july 1, our other seats appm.dll are as of june 1 and there is not the same problem.

[cadcam]

Kyle I am running the SP1 can you email or FTP the file from your box that is gouging so I see your settings.

 

Thanks cadcam

[cadcam]

Ok kyle there is some thing strange going on.

 

When I bring your file up I get this Varfiy 1

 

then if I just regen the file I get this on my box Varify 2

 

So there is a diffrence in boxs is what this tells me.

[kyle]

Jay,

 

That is exactly what I got on older service pack. Seems to have done it since I loaded the latest

Appmch9-070102.zip. Has anyone else had this problem, maybe I should go back to original sp1

 

Kyle

[cadcam]

Kyle I am running the latest updates and patchs I alwas update.

 

So it works right on mine but not on years.

Do you have a 9.0sp1 disk?

[kyle]

I downloaded the sp1 file from the mastercam website, but about a week ago I downloaded the latest app...zip file in my last reply and loaded that which put new files in the apps folder. Is this wrong?