PWCS / Planes / -1 Operation defaults

[Newbeeee™]

Hi All,

We have altered our PWCS section to allow 54,55 etc to be input, and the posted code outputs G54, G55 etc.

Currently our planes configuration/default is -1 =54.

But, can we do this:-

 

 

Machine toolpath group (named G54)

Operation 1 (change plane to 54)

Operation 2 (leave plane -1)

Operation 3 (leave plane -1)

 

Machine toolpath group (named G55)

Operation 1 (change plane to 55)

Operation 2 (leave plane -1)

Operation 3 (leave plane -1)

 

Post (G1) program and get all toolpath group (named G54) set G54, and all toolpath group (named G55) set at G55???

 

Currently we have in the post

if workofs$ = -1, workofs$ = 54

so anything that is -1 outputs G54.

 

Thanks