red arrow after verify

[Sbarner]

Greetings all,

 

I have a file that has many machine groups and operations in it. If I verify the current operation that I'm programming, then close verify, the red arrow moves to the first machine group, then moves down through each machine group. What it's doing in these groups...I don't know. What I do know is that it's quite frustrating to have to wait 10 seconds every time I verify an operation.

 

Also, if I have all the machine groups closed - that is, all the operations have been collapsed, the toolpath group and machine group have been collapsed - sometimes when verify closes it will randomly expand certain groups or operations.

 

Any thoughts on this? Running X3 MU1...

[Sbarner]

It appears that I'm not the only one having this problem...

[3R!< W3NG3R]

no your not. The entire OPs manager drives me nuts.

[Redfire427]

Ahhhhh yes. The jumping red arrow. I'm sure that is going to be fixed with the release of X MR2, no wait, X2, no, X2 MR1 or MR2, no wait, X3.

 

For sure, it will have an X in it.

 

Don't hold your breath.