Deleteing WCS Planes.

[TK-32™]

Hi guys, is it possible to delete user created WCS planes?

I started to make a part that required some WCS planes. I didn't like the way it was going so I decided to start again. I deleted all the ops but the planes I made are still there. I don't really care if they stay there but now it's kind of confusing having planes I don't need.

 

Thanks, Julio

[Metalmuncher]

Go to WCS, veiw manager, right click on the veiw and delete. You cannot delete if it is used in a toolpath

[gcode]

Open the View Manager and delete them.

If it won't let you, there are 3 reasons

1. you're still using it in an operation

2. its still being used as Stock View on the

Stock Setup page

3. Its still being used as the Saftey Zone View

on the Saftery Zone page.

 

Once you've dealt with these thre issues you can delete any view you like, except for the basic

7 that exist by default.

[TK-32™]

Thanks Terry, gcode, it worked just as you guys said.

[Justin Beebe at Folsom Tool]

I have noticed that if I don't save my file immediately after deleting planes in the view manager that they come back. Has anyone else seen this?