Misc. int help

[90rsgnuguy42]

I've set up mi1 to output high speed look ahead on my milling toolpath. It outputs (G8P1) in the correct place in the toolpath.

I put the cancel high speed look ahead (G8P0) at the retract using logic statement. It works well EXCEPT...it outputs the cancel at the end of the tool BEFORE I turn it on and not at the end of the tool I turn it on for. Any ideas?

[Tim Johnson]

Insert turn off code in ptoolend$

 

code:

---

ptoolend$        #End of tool path, before reading new tool data

!speed, !spdir2

if nextop$ = 1000, prvtpsub = virt_tlplnno

if nextop$ = 1002,

[

prvtpsub = 0

plane$ = 0

if sav_mi????? = ????, n$, add turn off code in here some where<<<<<<<<<<

n$, sgplane, e$

prv_tloffno$ = c9k

sav_mac_tloffno = 0

sav_mi6 = 0

sav_mi8 = 0

psub_end_st

subout$ = 0 #main NC program

if sav_cantext = 51 & sav_mi2 = 37, "#539=#540", e$

if vari_540_flg = 1,

[

"#539=#540", e$

vari_540_flg = 0

]

pcoolantoff

]

---

[spade117]

What post are you using?