Rapid move path

[Marshal]

This might be a stupid question, but I'm still pretty inexperienced with MCam so I'll ask it anyway

 

Is there a way to make a path for the tool to follow as a rapid move between operations? Normally you'd just let it go wherever it needed to go, but retracted high enough to not interfere with the part itself. But in this case, the part is too high for the mill to retract the tool far enough to travel between cuts without hitting the part.

 

I hope that explains what I'm asking. I know what I'm trying to ask in my head, but can't put it into words as well as I'd like

[K2csq7]

Did you try the point toolpath?

[Marshal]

nope, but that certainly looks like it'll work!

 

Thanks

[jhjr]

You could also use approach, retract points in your already created operations. In home/ref points under linking parameters. That way you don't have to create an extra op & will give the same result.